Refine Results24 items for Industrial EquipmentAlberta | |
Alberta (1,641 mi away) Distiller C-Can, Length - 40ft 3in., Width - 8ft 7in., Height - 9ft 3in., Burner C-Can, Length - 40ft 3in., Width - 8ft 7in., Height - 9ft 3in., Distillation tower height - 25ft, Marley Aquatower Model 492 Cooling Tower - SPX Cooling Technologies, ARO double diaphragm pumps - Ingersoll Rand, Feed pump, Product pump, Waste pump, Flojet pumps - Xylem, Dilutive water pump, Level controllers - Kimray, Level control valves - Kimray, Glycol circulating pumps - MP Pumps, 5 HP HTO 120, 7.5 HP HTO 180, Oil circulating pump - MP Pumps, 7.5 HP HTO 180, Vacuum pump LEM series - SIHI, 4 pass heat exchangers, Shell and tube, 2 heat exchangers in series, Length - 10ft, Diameter - 12.8125in., Condenser - American Industrial Heat Transfer, 2 pass shell and tube, Length - 7ft, Diameter - 8in. , Heat exchanger - American Industrial Heat Transfer, 2 pass shell and tube, Cool glycol finished product with cooling tower water, Length - 3ft , Diameter - 6.25in., PLC, Dir Alberta (1,641 mi away) Skid width - 8ft3in., Base to the top of distillation tower - 25ft, Base to the top of evaporator - 13ft9.5in., Marley Aquatower Model 492G Cooling Tower - SPX Cooling Technologies, ARO double diaphragm feed, product and waste pumps - Ingersoll Rand, Flojet pumps for: Tower Reflux/Dilutive Water/Seal Water - Xylem, Level controllers - Kimray, Level control valves - Kimray, Temperature controllers - Kimray, Glycol circulating pump 5 HP HTO 120 - MP Pumps, Oil circulating pump 5 HP HTO 120 - MP Pumps, Vacuum pump Model TRMB 25-30 - Travaini, 4 pass heat exchanger shell and tube - Perry - Length - 12ft GRU-2000-V2.5in. - O.D. - 10.75in. - Tubes (72) - 3/4in. O.D. x 18 GA. x 10ft LG., Condenser - Perry - Length - 10ft2in. - O.D. - 8.625in. - Tubes (55) - 3/4in. O.D. x 18 GA. x 8ft LG., Pneumatic control valves in panel with Isonic 4000 series manifold - Mead Fluid Dynamics, Temperature and Process Controller - Omega, Natural gas burner - Maxon - Series 67 Tube-O-Flame - 8 Alberta (1,677 mi away) Capacity: 800 Kn Live Load (81 Tons)
Size: Width: 48ft (14.755m) X Length: 60ft (18.8m)
CL-800 (Non-Composite) Bridges were Fabricated by Rapid-Span and are Engineer Stamped
6 - 18.29m Long Steel Girders c/w Bolted Bracing, 18 - Precast Concrete Non-Composite Deck Panels, Thrie Beam Railings & Posts (TL-2 Barrier) c/w W-beam and All Associated Hardware Required to Assemble Steel Girders and Precast Deck. Bridge Designed to Meet CL-800 Design Loading
DESIGN CODE: CAN/CSA-S6-14. In Service for 2 Years. Bridge Currently Disassembled and in Storage Alberta (1,721 mi away) 368 Ft, 2 x 6 frame, dormer clearance 5 ft 7 in, main floor and loft specs attached Alberta (1,586 mi away) Alberta (1,586 mi away) Alberta (1,722 mi away) Alberta (1,654 mi away) To Fit RITCHFIELD EQUIPMENT 1.8 cube tank mud vacumm, 25 hp 3 Phase Motor, Fruitland vacuum Compressor, explosion proof, float shut off, 480 volt 3 phase Alberta (1,696 mi away) Alberta (1,696 mi away) Alberta (1,696 mi away) Alberta (1,696 mi away) Alberta (1,696 mi away) Alberta (1,696 mi away) Alberta (1,696 mi away) Alberta (1,696 mi away) Alberta (1,696 mi away) Alberta (1,696 mi away) Alberta (1,696 mi away) Alberta (1,696 mi away) 2) 7/8 In to 5-1/2 In buggy heads,( 2)10 In and (1)12 In coil, 10 spare cables, all spare parts Alberta (1,701 mi away) 6 Ft Wide x 6 Ft Long Cyclone Dust Discharge Sits 11 Ft From Ground, Entire Unit 30 Ft Tall, 12 In Inlet, 8 Ft Tall Bag Plenum w/ (19) 6 In. Diameter x 72 In. Long Bags, (2) Drop Shoots, Air Lock 1/2 HP 11 RPM 208-220/440V Motor, E56Y Frame, Alert Blower and Pipe Co. Blower, w/Uniclosed 10 HP, 3 Phase 208V/ 220-440V 1500-1800 RPM Motor, 256U Frame Motor s/n 3520270, 23 In Blade Diameter, 10 1/2 In Wide Paddles, 13 1/2 In Diameter Inlet Hole, 12 In x 13 In Outlet Hole Alberta (1,708 mi away) Alberta (1,642 mi away) To Fit HOT ROD 18-11, 2x HotRot reactor units with control panels. Shredding system with loading hopper, 2x 10hp drive motors, and loading auger, 5 m3 infeed hopper with incline and cross-feed augers and monitoring platform, Horizontal and incline output augers with screener chute attachment. 1/2" minus screening trommel with 1yd3 wheeled cart for catching and unloading screened materials (custom Wilmar Wrangler quick attachment - could be modified for skid steer quick attachment plate). 2x 500 cfm biofilters including exhaust fans and monitors Items per page Items 1-24 of 24 total |
|